Fluoropolymer (PTFE) Kemmerer Bottle Kit, 1.2L

This top-of-the-line Fluoropolymer (PTFE) Kemmerer sampler includes 1.2 L Fluoropolymer (PTFE) body with all-Fluoropolymer All-Angle™ trip heads. Especially useful when you need chemical or heat resistance, or both. For strength, the Fluoropolymer (PTFE) center rod is solid; therefore, a line cannot pass all the way through it and be knotted, as in our other Kemmerers. We solve this problem by including a special Fluoropolymer PTFE) adapter which fastens the line to the center rod top. Because the seals are also Fluoropolymer (PTFE), your water sample touches only Fluoropolymer (PTFE).  Designed for trace metal and trace organic sampling. When running metal, organic, or any other chemical analysis, it is best to run a blank on the sampler prior to use.  • No metal parts to touch your sample!  • Fluoropolymer (PTFE) cylinder, 1.2 liter, ID: 57 mm (2.2”)  • Fluoropolymer (PTFE) end seals; Fluoropolymer trip head  • Solid Fluoropolymer(PTFE) rod for strength avoids trapping chemicals  • This sampler includes: 1.2L Fluoropolymer (PTFE) Sampler, 100’ 62-C15 line with both stainless steel and Flouropolymer (PTFE) line adapters, 46-G10 Fluoropolymer (PTFE) -coated messenger, and 910-A25 case. Note: Because PTFE is dimensionally unstable, we cannot guarantee a permanent seal. Bottle may leak and lose some sample through the seals. NOTE: Volume may vary slightly. It is recommended that you verify the exact volume of your bottle prior to use.